Goulburn, Cringila & Wagga Wagga
(02) 4821 3022 / (02) 4274 6488 / (02) 3806 6001

Shop

HomeShopGas EquipmentCutting NozzlesOXY/ACETCigweld COMET Cutting Nozzle Oxy/Acet Type 41

Cigweld COMET Cutting Nozzle Oxy/Acet Type 41

$16.55 inc. GST

Longer Nozzle Life – the high brass content and advanced manufacturing techniques give COMET taper seat nozzles an inbuilt quality

SKU: 306051 Categories: , Tags: , , ,
Cigweld COMET Cutting Nozzle Oxy/Acet Type 41

Description

Nozzles are the vital component of flame cutting equipment. They provide the preheating flames to raise the steel to ignition temperatures and direct the jet of oxygen onto the heated area to perform the cutting process.

  • Longer Nozzle Life – the high brass content and advanced manufacturing techniques give COMET taper seat nozzles an inbuilt quality
  • Better quality cutting – the mirror smooth finish of the gas ports assures stable gas flows and superior cutting oxygen stream.
  • Cuts are clean and smooth with the narrowest kerf width Less slag adhesion – high copper content of sizes 20, 24 etc conducts heat away from the nozzle face.
  • The nozzle keeps relatively cool and slag adherence to the nozzle face is reduced.
  • LPG (propane) flames do not blow off – taper seat LPG nozzles have slotted preheat ports which cause turbulence in the gas flow enabling the flame to hang on to the nozzles Faster nozzle attachment – easy change of position for bent nozzles.
  • Only one nut is tightened to give perfect seating with taper seat nozzles
  • Wider seating areas ensure gas-tight seals
  • Protective flange to safeguard tapered seat from damage

Blowpipe
COMET 3

Extension Barrel
307123, 307124, 307125

Gas Consumption (Fuel)
41-55 l/min

Gas Consumption (Oxy)
45-58 l/min

Heat Output
180 MJ/HR

Mixer
304003

Model Number
SHA1

Operating Pressure (Fuel)
100 kPa

Operating Pressure (Oxy)
150 kPa

Tip Size
8×12

Brand

Cigweld

Cigweld COMET Cutting Nozzle Oxy/Acet Type 41
X